GWS B2-EDF55-150 B2 electric RC Airplane kit.
GWS B2 bomber Almost ready to fly electric RC airplane kit.
GWS B2 GW/B2-EDF55/150
electric RC Airplane. Almost ready to fly kit with EDF55 X 2 RC280SA-3542 Motor included with ducted fans.The kit is a almost ready to fly (brsuhed motor with 2x ducted fan unit ) kit which means you have to build the kit, every parts comes separately in a box, you have to glue it together with the supplied GWS glue. Please note - Servos, esc , battery and radio is not included with the kit you have to buy them seperate in order to complete and fly this kit.
This RC airplane kit is suitable for intermediate to advanced level rc pilots. Due to its complexity in building and flying the rc airplane, it is not recomended for entry level or beginner lever rc fliers.
All international and shipping to AL, HI please email us first for shipping price
The RC Airplane -
The B2 bomber is mid level rc airplane, suitbale mostly for advanced or experienced rc flier, it is made of strong durable foam so it will handle quite a few hard landing and crashes. The GWS B2 uses a v-tail which functions both as elevator and rudder. You need to buy a GWS v-tail mixer if your radio does not have any mixing capabilities, but if you own a futaba, airtronics or any other radio with mixing capabilities you don't need to buy the v-tail mixer. The previous versions of the B2 were a bit unstable to fly but this new version includes a small fin that you have to attach to the bottom which make it stable to fly. The kit includes a tricycle GWS landing gear. To get the maximum performance with the EDF55 power unit, build as light as possible, spare the decals, paint it as lightly as possible with a water based acrylic paint, just do one coat if possible and take that landing gear off, also if you are going to use a lipo battery use at least 15C rated 7.4v lipo to squeeze bit more power out of the motors ( don't use 11.1v lipo with the stock motor as you might end up burning it). Overall this RC Airplane has scale look and flies like scale with limited to loop and possibly rolls. When flying try to fly it on a calm day with 5mph or less wind, early morning or late in the afternoons. Check the CG, do a ground pre-flight test, Give it a good toss, get some altitude and you will be fine. Best of all enjoy !
|
GWS V-tail mixer (not included in the kit )
Price - $ 18.50
|
EDF 55 ducted fan unit (included with the kit)
|
The kit includes -
1x ARF kit. Includes decals user manual and accessories
EDF55 X 2 RC280SA-3542 Motor with ducted fan unit
glue, color manual ( building instructions).
The kit comes white unpainted so you can customize it with your own colors.
For coloring you can use a waterbased acrylic paint you can find at walmart in the carfts section for about $2.
Items required to complete the kit
- Battery Required:7N~8N730AAAmAh above
- 2 cell 7.4v ( 15c) 800 ~ 1000 mah Lipo battery
- Servo required:PICO / NARO or any 9 g servo
- Speed controller: ICS-300 above or 2x 18A bru
- 4 channel radio and receiver required with mixing capabilites or GWS V-tail mixer required
Technical data
- Length:430 mm (16.9 in)
- Wing Span:882 mm (34.7 in)
- Wing Area:18.4 dm² (285.2 sq.in)
- Flying Weight:420~500 g (14.8~17.6 oz)
- Wing Loading:30.1~35.8 g/dm² (9.9~11.7 oz.sq ft)
- Power System:EDF55-150H
Package Contents
- 1 x GWS B2 Bomber Electric ducted fan jet with EDF55-150H Duct Fan power system set.
- Decals & accessories
- Foam safe glue
- Instruction manual
Video